A little regular care keeps aluminium windows & doors working smoothly and looking good for years. The routine is simple, takes very little time and needs nothing more than warm water, a mild detergent and a soft cloth.
This guide covers what to do and how often, what to avoid, how to look after tracks, seals and hardware, and when it is worth getting in touch with us.
Your care routine at a glance
| Task | How often | What to do |
|---|---|---|
| Wash frames, glass and sills | Every few months, and more often within a few kilometres of the coast | Warm water and a mild, non-abrasive detergent, then rinse and wipe dry |
| Clear weep holes and sill tracks | Each time you wash | Remove dirt, leaves and insects so water drains freely |
| Clean sliding tracks | Each time you wash | Vacuum or brush out grit before it wears the rollers |
| Wipe rubber seals | Each time you wash | Wipe clean. Never paint or oil them |
| Lubricate locks, hinges and rollers | Once a year | A light spray of dry silicone |
| Check locks, handles, stays and hinges | When you wash | Make sure they work freely |
| Adjust sliding door rollers | When a panel drags | Clean the track first, then adjust the rollers |
How to wash your windows & doors
- Clear the loose dirt. Brush or vacuum the sliding tracks and sill tracks, and clear the weep holes.
- Mix a mild solution. Use warm water and a mild, non-abrasive detergent.
- Wash the frames, glass and sills. Use a sponge or soft cloth. The same warm soapy water suits powdercoated and anodised frames.
- Rinse thoroughly. Use clean water. A hose is all you need.
- Wipe dry. Use a soft cloth to avoid water marks.
What to avoid
- Abrasive pads and cream cleansers. They can scratch the finish.
- Solvents, chlorine and sugar-soap. Harsh chemicals can damage the powdercoat or anodised finish.
- High-pressure washers. They can force water past the seals and strip lubricants. A bucket, sponge and hose do the job.
- Paint or oil on seals. Rubber seals and weatherstrips should only be wiped clean.
If a finish ever looks dull or chalky, talk to us before reaching for anything stronger.
Looking after tracks, weep holes and seals
These are the parts that quietly cause most of the problems. Weep holes and sill tracks let water drain out, so keep them clear of dirt, leaves and insects. Sliding tracks collect grit that wears the rollers, so vacuum or brush them out regularly. Wipe the rubber seals and weatherstrips with the rest of the frame, and leave them free of paint and oil.
Locks, handles and rollers
These are the parts you touch every day. Once a year, lightly lubricate locks, hinges and rollers with a dry silicone spray. Check that locks, stays and handles operate freely, and adjust the rollers if a sliding panel drags.
Looking after your doors
Sliding doors. Tracks do the hardest work on a sliding door. Vacuum or brush them out before grit collects and wears the rollers, then lightly lubricate the rollers once a year. If a panel starts to drag, clean the track first and then adjust the rollers. Our maintenance guide has how-to videos for adjusting the strike on a sliding door, adjusting a sliding door, and replacing a sliding door roller or a fly door roller.
Hinged, entrance, bifold and pivot doors. The same care applies to your doors as to your windows. Wash the frames and glass with warm water and a mild detergent, wipe the rubber seals and weatherstrips (never paint or oil them), and lightly lubricate the hinges and locks once a year. Check that the locks and handles operate freely.
If you live near the coast
Salt air, dust and grime build up on frames over time. Within a few kilometres of the coast, wash your windows & doors more often than every few months to stop salt sitting on the finish, and give the tracks and weep holes a quick check each time.
Getting the most out of your windows & doors over time
With the right maintenance and care, aluminium windows & doors can last decades. Powdercoated aluminium does not need repainting, and the routine above covers most of what a home needs. How long yours last depends on the conditions at your home, such as how exposed it is to the coast, the sun and the weather, and how well the windows & doors are looked after. If you submit an enquiry, we can look at the conditions at your home and talk you through what to expect.
Every M.C.G window & door carries a 7-year warranty, with a 12-month warranty on moving parts. Read our guide to aluminium vs timber windows to see how the upkeep compares.
When to get in touch
- A finish looks dull or chalky.
- A sliding panel keeps dragging after you have cleaned the tracks and adjusted the rollers.
- You have a question about your warranty.
- A lock, handle or stay will not operate freely.
- You are not sure what is safe to use on your frames.
If your windows & doors are well past their best, it may be time to look at replacing them. Here is what window replacement involves, step by step, and how double glazed window replacement works.
Frequently asked questions
How often should I clean aluminium windows & doors?
Wash the frames, glass and sills every few months, and more often within a few kilometres of the coast. Use warm water and a mild, non-abrasive detergent, then rinse and wipe dry.
Can I use a pressure washer on my windows & doors?
No. High-pressure washers can force water past the seals and strip lubricants. A bucket, sponge and hose are all you need.
Do aluminium windows & doors need painting?
No. Powdercoated aluminium does not need repainting. A regular wash keeps the finish looking its best.
What should I use to clean aluminium frames?
Warm water and a mild, non-abrasive detergent. Avoid abrasive pads, cream cleansers, sugar-soap and any cleaner containing solvents or chlorine.
How often should I lubricate my locks, hinges and rollers?
Once a year, with a light spray of dry silicone. Check that locks, stays and handles operate freely at the same time.
How do I stop my sliding door from sticking or dragging?
Clear the track of grit with a vacuum or brush, lightly lubricate the rollers with a dry silicone spray, and adjust the rollers if the panel still drags. Our maintenance page has how-to videos for adjusting a sliding door and replacing a roller.
How long do aluminium windows & doors last?
With the right maintenance and care, aluminium windows & doors can last decades. How long yours last depends on the conditions at your home, so submit an enquiry and we can look at them with you. Our windows & doors carry a 7-year warranty, with a 12-month warranty on moving parts.
Need a hand?
Not sure how to look after your windows & doors, or need a hand with care or repairs? Get in touch with our team, or call us on 1300 766 349. Thinking about replacement? Find out more about our aluminium window replacement service.
